|
|
Behringer Europower EP1500 Power Amp |
|
|
Description:
-2 x 700 Watts into 2 Ohms . 1,400 Watts into 4 Ohms bridged mono operation
-2 Channel, parallel or bridge mono operating modes
-Independent limiters for each channel
-Selectable low-frequency filters (30 Hz or 50 Hz)
-Speakon/Binding post outputs
-Balanced XLR and ¼" TRS inputs
-High-current Toroidal transformer (lowest noise emission)
-High-quality, high-speed FAIRCHILD® and TOSHIBA® transistors
-Back-to-front ventilation system
|
EUROPOWER PMX2000 Powered Mixer |
|
|
Description:
-500-Watt powered mixer (2 x 250-Watt power amplifier)
-6-Mono channels w/ULN mic/line preamps w/-25 dB pads and peak LEDs,
-99-Preset EFX (24-Bit)
-2x9 band graphic EQ . 3-band EQ
-4-Stereo channels: 3-w/the same ULN mic/line preamp, EQ and sends but with left and right 1 /4" connectors
-Stereo RCA inputs and recording outputs.
-Power amp inputs are available for connecting external mixers or sound sources
-Integrated limiter offers effective protection against speaker overloads
-Phantom power
|
Behringer EURORACK UB1204FX-PRO |
|
|
Description:
-8-balanced high-headroom line inputs with +4/-10 level selection on stereo channels
-24-bit digital stereo FX processor with 99 great-sounding VIRTUALIZER presets including reverb, delay, chorus, compressor, tube distortion, vinylizer, etc.
-3-band EQ plus switchable low-cut filter on all mono channels
-Ultra low-noise ULN design, highest possible headroom, ultra-transparent audio
-4-new state-of-the-art, studio-grade IMP "Invisible" Mic Preamps w/-130 dB dynamic range for 24-bit, 192 kHz sampling rate inputs
-Ultra-wide 60 dB gain range
-Lowest possible distortion 0.0007% (20 Hz - 20 kHz)
-2-Aux sends per channel: 1 pre/post fader switchable for monitoring/FX applications, 1 post fader (for internal FX or as external send)
-Peak LEDs, mute/alt 3-4, solo and PFL functions on all channels
-2-subgroups with separate outputs for added routing flexibility
-2-multi-functional stereo aux returns with flexible routing
-Balanced main mix outputs with gold-plated XLR connectors plus separate control room, headphones and stereo tape outputs
-Control room/phones outputs with multi-input source matrix
-Tape inputs assignable to main mix or control room/phones outputs
-Switchable +48 V phantom power for condenser microphones
-Long-wearing 60 mm logarithmic-taper ALPS® faders and sealed rotary controls
|
Behringer Eurolive B1520 Speaker |
|
|
Description:
-200 Watts RMS (400 Watts Power rating)
-2-Way PA Loudspeaker with High-Power 15"Speaker and HF Driver
-8 Ohms
-Frequency Response : 50 HZ - 18 kHZ
-Trapezoidal cabinet design
-For large PA setups the B1520 may be used in bi-amping mode adding a B1800X subwoofer for low frequency transmission
-Integrated HF driver protection and professional Speakon® connectors
|
|
)
)
)
)